Netgear EX6100 Extender

How to setup EX6100 Below are the steps for the configuration:-
  1. Plug in the range extender near to your router and wait for the power LED to turn solid green.
  2. To configure the extender with WPS (wireless protective setup), press the physical WPS button on the router and then press the WPS button on your extender.
  3. The lights on the extender will begin to flash after approximately 2 minutes you will have three solid green lights on your extender, which is an indication that the extender has got configured.
  4. If you do have a WPS button on your router, you can go for the manual configuration.
  5. You can use either your personal computer, or your laptop, or your smart phone.
  6. Open up a browser and type in the setup link mywifiext.net or the default IP that is 192.168.1.250.
  7. You will be asked to create an account
  8. After creating the account, it will take you to the next page where you have to select the wireless network you wish to extender.
  9. Enter the password for your wireless network when prompted.
  10. Now you will see your extender information.
  11. Scroll down and click on continue.
  12. Now it will take approximately 2 minutes for the configuration.
  13. Congratulations, you’re extender has been configured.